Calculate tile boxes from a room’s area

Before you start

• The exact product variant and its saved pack coverage.
• Measured dimensions or area with a known unit.
• An agreed extra allowance for cuts and breakage, if required.

Step by step

1. 1

   Open the selected product’s calculator

   Choose the quantity calculator for the product row. Confirm the product identity, sales unit and saved coverage. Different variants may have different packing, even when their names are similar.

2. 2

   Choose the measurement method

   Select the method matching your information: measured dimensions, a known area or a known quantity. Choose the Measurement unit before entering values. Do not enter feet as metres or square feet as square metres.

3. 3

   Enter measurements and optional details

   Enter the room dimensions or area. Add applicable untiled-area deductions in Optional details. Select Extra for cuts & breakage; use the allowance agreed for this job. The calculator adds extra after deductions.

4. 4

   Calculate and read the result

   Choose Calculate quantity. Read Measured area, Area deducted, Area to cover and Coverage per box together. Review how the amount is rounded to the supported sales unit. Use the example below to understand the arithmetic, not as a substitute for your own product data.

5. 5

   Apply the reviewed quantity

   Choose Apply quantity to update the selected product row. Recheck the row’s variant, unit and quantity in the estimate or sale. If you set a different order quantity, review the override rather than presenting it as the area-derived recommendation.

Check your result

Use this checklist as you review your work. Checks stay on this page until you leave or reload.

0 of 4 checks completed

If something differs

Still need help? Include the task, visible error and relevant record reference when you contact support.